Smart Lighting

Power Integrations Cuts Standby Waste to Zero with LinkZero(TM)-AX

Power Integrations (Nasdaq:POWI), the leader in high-voltage integrated circuits for energy-efficient power conversion, today introduced LinkZero-AX, an integrated offline switching IC that enables designers to achieve 0.00 watts of standby energy consumption in auxiliary power supplies. Commonly…

Published by LED professional ·

LED professional

LinkZero-AX features an innovative power-down mode that effectively turns off the auxiliary power supply when the end product is idle. Power-down mode is triggered by a signal accessible to a microcontroller, completely shutting down switch-mode operation and internal switch control circuits, eliminating energy wasted by these unnecessary functions. While in power-down mode, the LinkZero-AX stays alive, allowing the IC to be awakened with a reset pulse or button press. The bypass pin on the LinkZero-AX IC can also provide up to 500 A of current for use by any system control or sensing circuit.

LinkZero-AX provides designers with flexibility to build ultra-low standby power supplies without mechanical AC mains switches. When used in tandem with Power Integrations' CAPZero(TM) X capacitor discharge IC and SENZero(TM) sense resistor disconnect device, LinkZero-AX reduces standby power waste in high-power consumer products and appliances to as low as 4 mW, or effectively zero. (IEC 62301 Clause 4.5 classifies power usage of less than 5 mW as zero.)

Delivering the industry's lowest component count for standby power supplies, LinkZero-AX is a simple upgrade for engineers targeting zero standby energy consumption. The IC allows appliance designs to easily exceed all global energy-efficiency regulations, including the European EcoDesign Directive and ENERGY STAR(R).

Comments Silvestro Fimiani, product marketing manager at Power Integrations: "Power Integrations first delivered a stake in the heart to energy vampires with our LinkSwitch(TM) ICs, the first cost-effective replacement for old-fashioned, energy-sucking linear transformers. Now we've put a nail in the coffin with LinkZero-AX, which eliminates the energy vampires lurking inside appliances, TVs, and other products that utilize low-power auxiliary power supplies. LinkZero-AX enables designers to achieve zero standby power consumption at the lowest system cost using the fewest parts. It is a simple solution to implement - in new designs or as a retrofit upgrade - and compliance with international efficiency regulations is assured."

LinkZero-AX devices are available now in an SO-8C package at $0.35 each for 10,000-piece quantities. Full technical details, including the product datasheet, design ideas, and introductory video, are available now on the Power Integrations website at www.powerint.com/linkzero-ax.

About Power Integrations:
Power Integrations is the leading supplier of high-voltage integrated circuits used in energy-efficient power conversion. The company's innovative technology enables compact, energy-efficient power supplies in a wide range of electronic products, in AC-DC, DC-DC and LED lighting applications. Since its introduction in 1998, Power Integrations' EcoSmart(TM) energy-efficiency technology has saved an estimated $4.4 billion of standby energy waste and prevented millions of tons of CO2 emissions. The company's Green Room web site provides a wealth of information about "energy vampires" and the issue of standby energy waste, along with a comprehensive guide to energy-efficiency standards around the world. Reflecting the environmental benefits of EcoSmart technology, Power Integrations is included in clean-technology stock indices sponsored by the Cleantech Group (Amex: CTIUS) and Clean Edge (Nasdaq: CELS). For more information, please visit www.powerint.com.
Power Integrations, EcoSmart, LinkZero, LinkSwitch, CAPZero, SENZero, and the Power Integrations logo are trademarks or registered trademarks of Power Integrations, Inc. All other trademarks are the property of their respective owners.

Did you like this article?

Share this article

You could also like this

Smart Lighting

lixtec Advances Smart City Lighting with Intelligent Radar-Based Controls

Austrian technology company lixtec GmbH is advancing intelligent outdoor lighting with radar-based sensing solutions designed to improve energy efficiency, reduce unnecessary illumination and enable more responsive urban infrastructure. By combining precise traffic detection with intelligent…

Smart Lighting

Nordson Electronics Solutions to Feature New Fluid Dispensing and Plasma Treatment Systems for Panel-Level Packaging at SEMICON West 2026

Nordson Electronics Solutions, a global leader in reliable electronics manufacturing technologies, will feature two new systems designed to address the demanding requirements of panel-level packaging (PLP) and other advanced semiconductor packaging applications.

Smart Lighting

DALI Lighting Awards 2027 Open for Entries

The submission period for the 2027 DALI Lighting Awards has started. The organization is seeking innovative lighting projects from around the world that exemplify the full potential of DALI technology. Companies, design firms, and project teams have until January 8, 2027, to submit their work. The…

Smart Lighting

DALI Alliance Announces DALI 27 Inaugural Global Summit + Expo

The DALI Alliance will host the first-ever Global DALI Summit + Expo, DALI 27, on February 23 and 24, 2027, at the Supernova area in the Royal Dutch Jaarbeurs in Utrecht, the Netherlands. DALI 27 will connect experts from across the lighting, smart buildings, and smart cities sectors to shape the…

LuminusEdison optoLTF TechnologyLoreos

The latest Press Releases

Explore All

Stay current with our monthly Update from the lighting industry

LEDprofessional Newsletter

You will receive a confirmation e-mail. Unsubscribe anytime.