Exar Offers LED Driver with Inductive Boost Capabilities

“Added to Exar’s full line of industry-proven charge pump LED drivers, an inductive boost device delivers to system architects a highly efficient device for applications where LEDs must be tightly regulated to achieve uniform brightness,” said Joe Vyvijal, vice president, Power Product Line. “The SP6699, available in a small 2.9x2.8mm SOT23-6, is capable of driving up to five series LEDs with only four external components.”

Key Product Features:
The SP6699 is compatible with PWM dimming up to 1 kHz and analog dimming and achieves the shutdown current of 3.2uA. The SP6699 operates from 2.5V all the way up to 16V achieving 84% efficiency using a 0.2V feedback to minimize power loss. The 0.2V feedback is +/-6% accurate over the full operating temperature range. In addition, the SP6699 has an Over Voltage Protection (OVP) to ensure it can not be damaged in the event of an open circuited LED or a shorted feedback resistor.

“A good example of reducing board real estate needs is seen on the SP6699 with the integration of the schottky diode (a switch boost regulator), and by driving up to five LEDs in series display enabling designers to reduce connector pin count,” said Eric Pittana, director of product marketing, Power Product Line.

Power Management Products:
Highly reliable, accurate, power management is a critical part of any technology system. Exar has a broad array of high-performance and industry-proven power management solutions including handset and lighting controls, power conversion, and standard linear devices.

Prices, Packages, Availability and Additional Information:
Samples of the SP6699 are available now in a -40°C to +85°C temperature range. In 1,000 piece quantities in a SOT-23-6 package, the SP6699 is $0.59.

Additional information on this product can be found at:

http://www.exar.com/Common/Content/ProductDetails.aspx?ID=SP6699.