McLED

LEDs & Light Sources

Smart High-Power LED Driver from Lifud

As a pioneer in the LED industry who dared to break away from conventions and apply non-isolated design to the LED driver for UFO high bay driver, Lifud has done a good job referring to the sales records and customer feedback of the LF-FHBxxxYx series.

LED professional Editors

LED professional

Now, we are proud to announce that one more series of high-power LED driver was launched. This new series LF-FHBxxxYF/H/G is a rectangular driver suitable for not only indoor LED lighting but also outdoor LED lighting, such as LED shoe box lighting, LED high bay lighting, LED street lighting and so on.

High efficiency of 95%. The non-isolated design brings to us the higher efficiency, lower THD, smaller size and more competitive price. Meanwhile, the over-temperature- protection design, over-voltage-protection design, short-circuit-protection design and surge-protection design greatly improve the safety rating while using drivers of LF-FHBxxxYF/H/G series. Not to mention the certifications this driver can pass, TUV, CE, CB, RCM & SAA for the EU-standard type and UL & FCC for the UL-standard type.

3 options for different functional demands on projects. LF-FHBxxxYF is the 0-10 V / PWM / Resistance dimming type, LF-FHBxxxYH is the DALI / PUSH dimming type and LF-FHBxxxYG is the non-dimming type. Besides, there’s a potentiometer helping to adjust the output current of the driver.

Smart control. There’s an auxiliary cable on the driver of dimming type. It’s for the smart modules that can be powered by 12 Vdc, like sensors. This driver is flexible for distributors or agents to fulfill different functional demands of end users. For example, connecting a light sensor, the light will be dimmed to the appropriate level for saving energy. Connecting a zigbee signal converter, wireless control can be achieved.

Stand-by power consumption < 1 W. This series can be dimmed off via remote control or dimmers, the stand-by power consumption < 1 W after the lights are dimmed off.

Outdoor application. This series of driver is of IP65 rating. L-N: 4 KV, L/N-GND: 6 KV. Working with our surge protection device, the driver can withstand up to 15KV lightning.

Flicker free design helps improve user experience. Staying under the light with invisible flicker, people’s eyes are easy to feel tired or uncomfortable. Therefore, this driver is suitable for those who ask for high quality user experience and the percent flicker is as low as 0.5%.

If you are interested, feel free to contact us via sales@lifud.com. Or find out more at www.lifud.com

Did you like this article?

Share this article

You could also like this

LEDs & Light Sources

Cree LED packs four colors into a tiny 2.1 mm XLamp X21 LED

Cree LED, a Penguin Solutions brand, launched the XLamp X21 Multi-Color LEDs on 10 November 2026. Each one holds four LED chips in different colors in a 2.1 x 2.1 mm ceramic package, the smallest in Cree LED’s multi-color range. The tiny light source works with optics that are 29% smaller and still gives a tighter beam. 11 die colors, 14 versions; samples are available now.

LEDs & Light Sources

Raising the efficiency bar for photo red LEDs

Cree LED’s next-generation XLamp® XP-L Photo Red S Line LED achieves 83.9% typical wall-plug efficiency (WPE) at 700 mA and 85°C, approximately a three percent improvement over the current generation, while maintaining a typical peak wavelength of 664 nm. The advancement gives horticultural lighting manufacturers greater flexibility to improve fixture performance while helping growers get more value from the energy used for lighting.

LEDs & Light Sources

Cree LED Debuts JK5050B 6V LED for Outdoor Lighting

The new Cree LED J Series® JK5050B 6V D Class White LEDs are designed for high-output indoor and outdoor lighting, including street lights, parking-lot luminaires and parking-deck fixtures.

LEDs & Light Sources

Seoul Semiconductor ends need for rare earths in white LEDs

Seoul Viosys has begun mass production of WICOP 3, a white micro LED as small as 10 µm that requires no rare earth elements. The packaging-free technology aims to reduce costs and environmental impact while opening new opportunities in compact lighting, augmented reality, and optical communications.

Luminuscree ledEdison optoTE connectivityLTF TechnologyLoreos

The latest Press Releases

Explore All

Stay current with our monthly Update from the lighting industry

LEDprofessional Newsletter

You will receive a confirmation e-mail. Unsubscribe anytime.