McLED

LEDs & Light Sources

Research & Markets - OLED for Lighting 2012 Report: How to Drive OLED to a $1.7B Market Opportunity by 2020

OLED revenue has been driven mainly by display applications (smartphones.) but the industry is now targeting the lighting market based on the technology specificities in terms of design (form factor) and efficiency. On this new battleground, OLED will have to compete with LED technology which has…

LED professional Editors

LED professional

OLEDs will develop slowly in the lighting market (Automotive and General lighting) and attract mainly niche applications (specialty and high-end lighting), differentiating through design possibilities. To access traditional market segments (commercial lighting, office lighting.), OLED technology will have to find a spark, as well as combine enough different niche markets to achieve the economies of scale that will decrease costs. In our estimation, this should be triggered by 2014 with the use of larger substrates and better process control.

We estimate that OLED lighting panels will reach a market size of nearly $2.8M in 2012 and will peak to nearly $1.7B by 2020 (Fig. 1). Growth will be driven mainly by General Lighting applications, representing more than 70% of the overall OLED lighting business in 2020.

The report presents all OLED Lighting applications and associated market metrics for the period 2012-2020, providing details about drivers & challenges, volume and market size per application.

Technology Approaches that Drive OLED into Mass Production:
As for any emerging technology, a large variety of materials and OLED structures are used in production or tested. Moreover, alternatives to existing materials are still actively researched in order to improve the light performance, lifetime, and decrease manufacturing costs. Although the uncertainty about the future winning material approach between small-molecule OLED materials and polymer materials remains, polymers continue to struggle to demonstrate the ability to turn their cost and performance potential into an industrial reality.

Rigid glass maintains its exclusivity as a substrate material in OLED lighting panel production. However, progress has been made in the development of techniques, such as roll-to-roll processing, the development of flexible ultra-thin glass and flexible encapsulation solutions, which will enable the progressive penetration of flexible OLED panels into the lighting market.

The wide variety of technology approaches provides opportunity for numerous players involved in OLED Research & Development activities (Fig. 2). However, the identification of winning technology approaches and the precise identification of the corresponding time-to-market are essential for the successful development of the OLED lighting business.

The report presents a deep analysis of OLED technology, OLED manufacturing and associated roadmaps,providing details about different OLED structures, requirements for each layer, materials used, different manufacturing techniques and associated equipment, manufacturing costs.

For more information please click on:
http://www.researchandmarkets.com/publication/jcgotn/oled_for_lighting_2012_how_to_drive_oled_to

Did you like this article?

Share this article

You could also like this

LEDs & Light Sources

Cree LED packs four colors into a tiny 2.1 mm XLamp X21 LED

Cree LED, a Penguin Solutions brand, launched the XLamp X21 Multi-Color LEDs on 10 November 2026. Each one holds four LED chips in different colors in a 2.1 x 2.1 mm ceramic package, the smallest in Cree LED’s multi-color range. The tiny light source works with optics that are 29% smaller and still gives a tighter beam. 11 die colors, 14 versions; samples are available now.

LEDs & Light Sources

Raising the efficiency bar for photo red LEDs

Cree LED’s next-generation XLamp® XP-L Photo Red S Line LED achieves 83.9% typical wall-plug efficiency (WPE) at 700 mA and 85°C, approximately a three percent improvement over the current generation, while maintaining a typical peak wavelength of 664 nm. The advancement gives horticultural lighting manufacturers greater flexibility to improve fixture performance while helping growers get more value from the energy used for lighting.

LEDs & Light Sources

Cree LED Debuts JK5050B 6V LED for Outdoor Lighting

The new Cree LED J Series® JK5050B 6V D Class White LEDs are designed for high-output indoor and outdoor lighting, including street lights, parking-lot luminaires and parking-deck fixtures.

LEDs & Light Sources

Seoul Semiconductor ends need for rare earths in white LEDs

Seoul Viosys has begun mass production of WICOP 3, a white micro LED as small as 10 µm that requires no rare earth elements. The packaging-free technology aims to reduce costs and environmental impact while opening new opportunities in compact lighting, augmented reality, and optical communications.

Luminuscree ledEdison optoTE connectivityLTF TechnologyLoreos

The latest Press Releases

Explore All

Stay current with our monthly Update from the lighting industry

LEDprofessional Newsletter

You will receive a confirmation e-mail. Unsubscribe anytime.