McLED

Regulations

No EPBD implementation without Lighting

LightingEurope published two position papers on lighting in the EPBD.

Published by LED professional ·

Elena Scaroni, Secretary General at LightingEurope.
Elena Scaroni, Secretary General at LightingEurope.

“The revised Energy Performance of Buildings Directive (EPBD) represents a significant step towards reducing the carbon footprint of the building sector and enhancing indoor spaces across the European Union. The benefits of quality lighting are clear, and the necessary lighting products are already available. By mandating that no renovation occurs without upgrading the lighting installation, we can seize this opportunity and ensure we do not waste it”, says Elena Scaroni, Secretary General of LightingEurope. Member states are tasked with implementing the directive into national law. To support this process, LightingEurope has published two position papers highlighting the crucial role of lighting in achieving the directive's objectives.

Lighting as part of renovation. Promoting renovation and energy efficiency is central to the EPBD. Lighting can provide energy-efficient solutions, such as LED luminaires and lighting control systems, which significantly contribute to energy savings and reduce building operation costs. Beyond energy efficiency, selecting the appropriate lighting solution for each environment can enhance productivity, safety, and create pleasant indoor spaces. “The EU member states must recognize the importance of lighting in the renovation of Europe’s buildings. In particular, public and commercial buildings must lead by example and utilize the full potential of LED luminaires in tandem with lighting controls and sensors. The time to act is now and we should not settle for the bare minimum”, says Marion Ebel, Director of Corporate Affairs.

Lighting as part of Indoor Environmental Quality. With renovation taking center stage in the EPBD, Indoor Environmental Quality is at risk of falling by the wayside. However, IEQ must not be treated as a secondary concern, as good quality indoor spaces can impact a building occupant’s productivity, creativity, and wellbeing.

The inclusion of IEQ in the EPBD has the potential to significantly enhance the quality of indoor spaces. “The EPBD implementation must not disregard IEQ but rather consider it on par with any provisions on energy efficiency. Buildings are built for people and IEQ is the key contributor to making buildings people friendly. We urge member states to adopt a broad definition of IEQ to adequately reflect the wide range of factors contributing to good indoor spaces”, adds Simon Wessels, Policy Officer.

For more information:
Position Paper – EPBD implementation – Indoor Environmental Quality
Position Paper – EPBD implementation - Renovation

Did you like this article?

Share this article

You could also like this

Regulations

DALI Part 151 certification reaches products, targets surge protection for outdoor lighting

DALI Part 151 has moved from specification into certified products, giving manufacturers a defined framework for surge protection of DALI control devices exposed to induced electrical transients in outdoor lighting.

Regulations

UK now allows approved LED replacement bulbs in MOT tests

From 14 October 2026, MOT testers must accept ECE approved LED replacement (LEDr) bulbs fitted in compatible halogen headlamp units on class 3, 4, 5 and 7 vehicles. The change does not apply to class 1 and 2 motorcycles, halogen units converted for HID bulbs, or full LED headlamp unit replacements. Approved LEDr products must carry a permanent, secure approval sticker on the vehicle visible during the MOT. Testers need only check the presence and condition of this sticker and must fail the headlamp where the sticker is missing, unreadable, appears tampered with, or does not match the fitted bulb.

Regulations

IEC 60598-2-24:2026 published — updated requirements for limited-surface-temperature luminaires

The new edition of IEC 60598-2-24:2026 has been officially published. It specifies essential safety requirements for luminaires intended for use where combustible dust or flammable materials are present, necessitating strict control of enclosure surface temperatures to prevent fire or ignition. The revision aligns test methods and construction requirements with recent developments in industrial and specialist lighting and with the latest edition of the general standard CEI EN 60598-1:2024. Publication of the EN and subsequent CEI standard will follow as formal steps, after unanimous positive votes. ASSIL members can contact the Technical Area for clarification.

Regulations

The EU Energy Performance of Buildings Directive (EPBD) Is Coming

Europe aims to become climate-neutral by 2050 under the European Green Deal. A key pillar of this initiative is the revised European Energy Performance of Buildings Directive (EPBD), which all 27 EU Member States are required to implement beginning in 2026.

Luminuscree ledEdison optoTE connectivityLTF TechnologyLoreos

The latest Press Releases

Explore All

Stay current with our monthly Update from the lighting industry

LEDprofessional Newsletter

You will receive a confirmation e-mail. Unsubscribe anytime.