McLED

LEDs & Light Sources

New Cree LED Troffers Promise Shortened Payback-Time for Commercial Lighting

Antiquated, inferior commercial lighting gets a much-needed transformation with the revolutionary new series of LED troffers from Cree, Inc. (Nasdaq: CREE). The Cree CR family of architectural troffers, including the CR24™, CR14™ and CR22™, bring a superior combination of performance, aesthetics…

LED professional Editors

LED professional

Main Features:

  • Cree TrueWhite™ Technology
  • Unprecedented combination of 90 CRI and up to 110 lumens per watt
  • An innovative thermal management system boosting LED lifetime, efficacy and color consistency
  • Designed to last 50,000 hours

The CR series is redefining commercial lighting by offering a no-compromise alternative when upgrading over fluorescent lighting. More affordable than comparable fluorescent options, CR series fixtures deliver higher-quality light, longer life and greater energy savings, with an estimated payback of less than a year in a typical office installation*.

“We chose the Cree CR troffersbecause the payback calculation was clear,” said Richard J. Michal PE, MBA, LEED-AP, facilities engineer planning design and construction, Butler University. “Seeing the CR troffers installed, they have an elegant aesthetic that produces an incredibly high-quality light. When you combine that with our predicted energy and maintenance savings, it was a no-brainer.”

“You never need to install fluorescent troffer lighting again,” said Chuck Swoboda, Cree chairman and CEO. “The traditional lighting experts keep telling us what LEDs can’t do, and we keep showing them that anything is possible. We think it is time to rid the world of the compromises inherent in choosing fluorescent lighting—the flickering, toxic mercury, poor color, ineffective dimming and disposal expense.”

“Our life cycle cost analysis using Cree LED lighting on our projects decreased the watts-per-square-foot by upwards of 60 percent,” said Nick Santore, PE, LEED-AP, Senior Electrical Engineer at O’Brien/Atkins Associates. “That decrease translated into measurable reductions in building HVAC equipment sizing requirements, delivering additional savings.”

According to Freedonia Group, the 2009 US indoor lighting fixture market is estimated at U.S. $6.4 billion. Lighting represents 27 percent of American commercial building energy consumption according to the U.S Department of Energy.

The Cree CR troffer family is powered by Cree TrueWhite® Technology to deliver an unprecedented combination of 90 CRI and up to 110 lumens per watt, far outperforming any other current lighting options.

An innovative thermal management system enables the LEDs to consistently run cooler, providing significant boosts to lifetime, efficacy and color consistency. All fixtures feature step or 0-10V dimming, are designed to last at least 50,000 hours and feature a five-year warranty.

The CR troffer family includes three models and multiple performance options: 1ft x 4 ft, 2ft x 4ft and 2ft x 2ft. For technical specifications, please visit crseries.CreeLEDlighting.com.

The Cree CR series is made in the United States, sold through Cree LED Lighting sales channels and is currently shipping in volume. For additional information about the Cree CR series of troffers, please visit crseries.CreeLEDlighting.com. The CR troffers will also be demonstrated at Cree’s booth #1925 at Lightfair International in Philadelphia, May 17-19.

*Payback calculations compare the Cree CR24 LED troffer with an architectural 2-tube T8 fluorescent fixture of comparable light output and features. The calculations also assume a typical office space of 200 units, 12-hour per day usage, $.10 kWh energy costs, lighting-related HVAC impact, and relamp maintenance. This results in a payback of less than one year when upgrading to more efficient CR series lighting from Cree.

Did you like this article?

Share this article

You could also like this

LEDs & Light Sources

Cree LED packs four colors into a tiny 2.1 mm XLamp X21 LED

Cree LED, a Penguin Solutions brand, launched the XLamp X21 Multi-Color LEDs on 10 November 2026. Each one holds four LED chips in different colors in a 2.1 x 2.1 mm ceramic package, the smallest in Cree LED’s multi-color range. The tiny light source works with optics that are 29% smaller and still gives a tighter beam. 11 die colors, 14 versions; samples are available now.

LEDs & Light Sources

Raising the efficiency bar for photo red LEDs

Cree LED’s next-generation XLamp® XP-L Photo Red S Line LED achieves 83.9% typical wall-plug efficiency (WPE) at 700 mA and 85°C, approximately a three percent improvement over the current generation, while maintaining a typical peak wavelength of 664 nm. The advancement gives horticultural lighting manufacturers greater flexibility to improve fixture performance while helping growers get more value from the energy used for lighting.

LEDs & Light Sources

Cree LED Debuts JK5050B 6V LED for Outdoor Lighting

The new Cree LED J Series® JK5050B 6V D Class White LEDs are designed for high-output indoor and outdoor lighting, including street lights, parking-lot luminaires and parking-deck fixtures.

LEDs & Light Sources

Seoul Semiconductor ends need for rare earths in white LEDs

Seoul Viosys has begun mass production of WICOP 3, a white micro LED as small as 10 µm that requires no rare earth elements. The packaging-free technology aims to reduce costs and environmental impact while opening new opportunities in compact lighting, augmented reality, and optical communications.

Luminuscree ledEdison optoTE connectivityLTF TechnologyLoreos

The latest Press Releases

Explore All

Stay current with our monthly Update from the lighting industry

LEDprofessional Newsletter

You will receive a confirmation e-mail. Unsubscribe anytime.