McLED

LEDs & Light Sources

MechaTronix Launches 5.000lm LED Cooling in just 20mm Height

With the current lumen boost of many tier 1 LED manufacturers, the demand raised exponentially for ultra-low profile LED coolers for use in height restricted down light applications. Although the increase in lumen per watt and internal efficacy of recent led COB modules has made the use of passive…

LED professional Editors

LED professional

MechaTronix now launches the ModuLED Mega 13420. With a diameter of 134 mm and a height as low as 20 mm, this LED cooler performs a thermal resistance of 1.32°C/W or the equivalent of 5.000 lumen.

The challenge in this ultra-low LED cooling profiles comes from the spreading of the heat source to the rest of the design. Creating enough basic cooling surface in a wide diameter low profile LED cooler is not that hard. But the LED COB areas have been shrinked over 40% in the last two years to obtain an easier light image control with secondary optics. Also the power density on that area has significantly increased from 25 watts in a 28x28 package to recently 50 watts and more. With this major change in light engine approach, the spreading resistance of a low-profile LED cooler becomes the focus point to guarantee the life span of the lighting design.

Through advanced thermal engineering and hundreds of hours of thermal simulations, MechaTronix has reached their ultimate goal on this 20 millimeter low profile: a maximum temperature drop of 3 degrees Celsius from the heart of the cooler to the outer diameter cooling area, equivalent for the perfect internal spreading resistance.

To avoid extra costs by after work, the ModuLED Mega is again foreseen from the ground-breaking modularity on mounting holes that allows for very easy attachment of a great number of market-leading LED engines. Looking at the specific purpose of this LED cooler to create ultra-low down light applications with higher lumen packages, MechaTronix has added besides the Zhaga platforms some extra mounting pitches on this design for the Tridonic Talexx FLE and DLE, Osram PrevaLED Cube, Philips Fortimo DLM and a further score of tier 1 LED manufacturers.

Full details of the ModuLED Mega LED cooler are available on www.led-heatsink.com
Samples and pricing can be obtained through the worldwide distribution network www.led-heatsink.com/global.php

About MechaTronix:
MechaTronix was founded as a creative designer & manufacturer of high end mechanical plastic & metal parts. With its Asia-based headquarters in Kaohsiung, Taiwan, MechaTronix became a powerhouse at designing and manufacturing heat sinks and thermal solutions for OEM and LED lighting applications. Strategic partnerships with major LED manufacturers and sharing our thermal knowledge with their luminaire designers are our core missions. Simple passive cooling, advanced heat pipe technology or active cooling solutions? - MechaTronix offers of the shelf and tailored solutions to its worldwide professional customer base.

Did you like this article?

Share this article

You could also like this

LEDs & Light Sources

Cree LED packs four colors into a tiny 2.1 mm XLamp X21 LED

Cree LED, a Penguin Solutions brand, launched the XLamp X21 Multi-Color LEDs on 10 November 2026. Each one holds four LED chips in different colors in a 2.1 x 2.1 mm ceramic package, the smallest in Cree LED’s multi-color range. The tiny light source works with optics that are 29% smaller and still gives a tighter beam. 11 die colors, 14 versions; samples are available now.

LEDs & Light Sources

Raising the efficiency bar for photo red LEDs

Cree LED’s next-generation XLamp® XP-L Photo Red S Line LED achieves 83.9% typical wall-plug efficiency (WPE) at 700 mA and 85°C, approximately a three percent improvement over the current generation, while maintaining a typical peak wavelength of 664 nm. The advancement gives horticultural lighting manufacturers greater flexibility to improve fixture performance while helping growers get more value from the energy used for lighting.

LEDs & Light Sources

Cree LED Debuts JK5050B 6V LED for Outdoor Lighting

The new Cree LED J Series® JK5050B 6V D Class White LEDs are designed for high-output indoor and outdoor lighting, including street lights, parking-lot luminaires and parking-deck fixtures.

LEDs & Light Sources

Seoul Semiconductor ends need for rare earths in white LEDs

Seoul Viosys has begun mass production of WICOP 3, a white micro LED as small as 10 µm that requires no rare earth elements. The packaging-free technology aims to reduce costs and environmental impact while opening new opportunities in compact lighting, augmented reality, and optical communications.

Luminuscree ledEdison optoTE connectivityLTF TechnologyLoreos

The latest Press Releases

Explore All

Stay current with our monthly Update from the lighting industry

LEDprofessional Newsletter

You will receive a confirmation e-mail. Unsubscribe anytime.