McLED

LEDs & Light Sources

Luxtech Launches Industry-Leading Flexible LED Tape Family

Luxtech, a leading American manufacturer of LED modules, today announces its FLEX family of architectural-grade flexible LED tape for luminaires. The new FLEX family addresses the concerns luminaire manufacturers have with previous LED tape products. The product is cuttable in convenient lengths…

LED professional Editors

LED professional

FLEX also introduces a new supply chain paradigm for manufacturers used to sourcing rigid LED modules. Cuttable in increments as short as one inch, the product is compatible with a wide variety of luminaire designs. This FLEX-abilityTM means inventories – and associated losses – can be drastically minimized.

Because of the reduced inventory requirements and non-rigid properties of FLEX, manufacturers have increased freedom to experiment with new luminaire designs. Before LED, manufacturers were limited to a few lamp types when designing fixtures. Luxtech pioneered custom LED modules, drastically expanding form factor possibilities. FLEX takes the LED advantage a step further, providing not only physical flexibility, but also creative flexibility.

Luxtech specifies 3-step MacAdam binning and LM-80 tested LEDs up to 90 CRI for all its products, including FLEX. This means luminaire manufacturers can expect the same high-quality color consistency and performance they get from their rigid Luxtech LED modules. In addition, FLEX is backed by a comprehensive 5-year warranty.

Over the coming weeks, Luxtech will formally announce each product in the new FLEX family. The flagship offering, FLEX CC, is cuttable every inch and works with familiar constant current drivers. FLEX Reach offers 99% brightness consistency over runs up to 20 feet. FLEX Swerve bends in a planar direction up to 90°, and FLEX Color supports creative luminaire and signage design with individually-addressable RGB segments.

For additional information, please contatc Luxtechat sophie@luxtechled.com or visit the Luxtech website at www.luxtechled.com

Did you like this article?

Share this article

You could also like this

LEDs & Light Sources

Cree LED packs four colors into a tiny 2.1 mm XLamp X21 LED

Cree LED, a Penguin Solutions brand, launched the XLamp X21 Multi-Color LEDs on 10 November 2026. Each one holds four LED chips in different colors in a 2.1 x 2.1 mm ceramic package, the smallest in Cree LED’s multi-color range. The tiny light source works with optics that are 29% smaller and still gives a tighter beam. 11 die colors, 14 versions; samples are available now.

LEDs & Light Sources

Raising the efficiency bar for photo red LEDs

Cree LED’s next-generation XLamp® XP-L Photo Red S Line LED achieves 83.9% typical wall-plug efficiency (WPE) at 700 mA and 85°C, approximately a three percent improvement over the current generation, while maintaining a typical peak wavelength of 664 nm. The advancement gives horticultural lighting manufacturers greater flexibility to improve fixture performance while helping growers get more value from the energy used for lighting.

LEDs & Light Sources

Cree LED Debuts JK5050B 6V LED for Outdoor Lighting

The new Cree LED J Series® JK5050B 6V D Class White LEDs are designed for high-output indoor and outdoor lighting, including street lights, parking-lot luminaires and parking-deck fixtures.

LEDs & Light Sources

Seoul Semiconductor ends need for rare earths in white LEDs

Seoul Viosys has begun mass production of WICOP 3, a white micro LED as small as 10 µm that requires no rare earth elements. The packaging-free technology aims to reduce costs and environmental impact while opening new opportunities in compact lighting, augmented reality, and optical communications.

Luminuscree ledEdison optoTE connectivityLTF TechnologyLoreos

The latest Press Releases

Explore All

Stay current with our monthly Update from the lighting industry

LEDprofessional Newsletter

You will receive a confirmation e-mail. Unsubscribe anytime.