McLED

LEDs & Light Sources

Lumileds Continues To Lead Advances for Red InGaN LEDs

Lumileds has extended its record-setting advances in its InGaN Red LED development. The InGaN material system is an attractive alternative to AlInGaP for creating red light sources because it harmonizes manufacturing with Green and Blue LEDs, which are also based on InGaN. The large industrial…

Published by LED professional ·

Lumileds Continues To Lead Advances for Red InGaN LEDs

Lumileds scientists are the first to demonstrate that rich deep red light (615nm dominant wavelength corresponding with 635nm peak) can be produced with InGaN LEDs, achieving a Wall plug Efficiency of 7.5% at a current density of 10A/cm². Lumileds’ breakthroughs address the challenges associated with high indium concentrations including spectral peak shifts and broadening with current density.

“The current efficiency for sub-10-micron red microLEDs is an impediment to cost-effective and efficient microLED displays,” said Rob Armitage, Director of Nitride Epitaxy Development. “Our work on Red InGaN validates our roadmap to meeting cost and efficiency thresholds for adoption.”

615nm Dominant Wavelength Red InGaN LEDs
Wall Plug Efficiency vs. Current Density

In addition to demonstrating high-efficiency Red InGaN, Lumileds successfully established Red, Green, and Blue light emission from a single InGaN epitaxial stack. Subsequently, Lumileds translated this into microLEDs with excellent color quality and electrical characteristics. The integration of the three primary colors into single microLEDs has a tremendous impact on achieving low-cost high-yield microLED display assembly and will ultimately enable compact full-color displays for Augmented Reality applications.

Rob Armitage, Director of Nitride Epitaxy Development at Lumileds is an invited speaker at the upcoming IWN 2024 conference where he will discuss the Development of InGaN LEDs for Color Display Applications.

Did you like this article?

Share this article

You could also like this

LEDs & Light Sources

Cree LED packs four colors into a tiny 2.1 mm XLamp X21 LED

Cree LED, a Penguin Solutions brand, launched the XLamp X21 Multi-Color LEDs on 10 November 2026. Each one holds four LED chips in different colors in a 2.1 x 2.1 mm ceramic package, the smallest in Cree LED’s multi-color range. The tiny light source works with optics that are 29% smaller and still gives a tighter beam. 11 die colors, 14 versions; samples are available now.

LEDs & Light Sources

Raising the efficiency bar for photo red LEDs

Cree LED’s next-generation XLamp® XP-L Photo Red S Line LED achieves 83.9% typical wall-plug efficiency (WPE) at 700 mA and 85°C, approximately a three percent improvement over the current generation, while maintaining a typical peak wavelength of 664 nm. The advancement gives horticultural lighting manufacturers greater flexibility to improve fixture performance while helping growers get more value from the energy used for lighting.

LEDs & Light Sources

Cree LED Debuts JK5050B 6V LED for Outdoor Lighting

The new Cree LED J Series® JK5050B 6V D Class White LEDs are designed for high-output indoor and outdoor lighting, including street lights, parking-lot luminaires and parking-deck fixtures.

LEDs & Light Sources

Seoul Semiconductor ends need for rare earths in white LEDs

Seoul Viosys has begun mass production of WICOP 3, a white micro LED as small as 10 µm that requires no rare earth elements. The packaging-free technology aims to reduce costs and environmental impact while opening new opportunities in compact lighting, augmented reality, and optical communications.

Luminuscree ledEdison optoTE connectivityLTF TechnologyLoreos

The latest Press Releases

Explore All

Stay current with our monthly Update from the lighting industry

LEDprofessional Newsletter

You will receive a confirmation e-mail. Unsubscribe anytime.