LTM8040: 0A to 1A uModule LED Driver & Current Source Integrates All Circuitry & Protects LEDs

Driving an LED string with the LTM8040 is as simple as adding the input capacitor and connecting the LED string. The LTM8040 can drive from 0A to 1A through a string of LEDs with ±2% accuracy at full load current. The device protects against an accidental open LED string with its output voltage clamp circuitry and against short-circuit incidents with a frequency foldback scheme. The LTM8040 has applications in 2-cell Li-Ion battery packs, rectified 12VAC and industrial 24V for LCD backlighting, portable lighting, and wide area lighting.

The LTM8040 can convert an input voltage range of 4V to 36V to a lower voltage ranging from 2.5V to 13V, suitable for driving a wide variety of color and white LEDs with different voltage-drops (VD). The device also features both analog and True Color PWM™ dimming, allowing a 400:1 constant color dimming range. The LED current amplitude can be linearly controlled from 0A to 1A with a single resistor. The default switching frequency is 500kHz, which can be adjusted with a resistor for up to 2MHz operation.

The LTM8040 is housed in a 9mm x 15mm x 4.32mm land grid array (LGA) package and is offered in two temperature grades of 0ºC to 125ºC and -40ºC to 125ºC (internal package temperature). 1,000-piece pricing starts at $¬7.45. For more information, visit www.linear.com.

Features:
• True Color PWM Delivers Constant Color with 400:1 Dimming Ratio
• Wide Input Range: 4V to 36V
• Up to 1A LED Current
• Adjustable Control of LED Current
• High Output Current Accuracy is Maintained Over a Wide Range from 35mA to 1A
• Open LED and Short-Circuit Protection
• Grounded Cathode Connection
• Small Footprint, Low Profile (15mm × 9mm × 2.82mm) Surface Mount LGA Package

Applications:
• Automotive and Avionic Lighting
• Architectural Detail Lighting
• Display Backlighting
• Constant Current Sources