McLED

Regulations

LUXEON XR-HL2X and XR-5050 HE Standard Modules Provide a Faster Path to Lighting Solutions

Utilizing two of Lumileds most popular and powerful LEDs, the company has released two new standard integrated modules, LUXEON XR-HL2X and LUXEON XR-5050 HE. Both offer lighting engineers a faster, simpler way to realize powerful, highly efficient lighting solutions. Standard optics are available…

Published by LED professional ·

LUXEON XR-HL2X and XR-5050 HE Standard Modules Provide a Faster Path to Lighting Solutions

LUXEON XR-5050 HE
With light output exceeding 8600 lumens at 184 lumens per Watt, ≤ 3SDCM color control, and 70, 80, and 90CRI options across the CCT range, LUXEON XR-5050 HE is a highly efficient solution. Both indoor and outdoor lighting, such as architectural, historical, high bay, pedestrian and roadway and sports lighting, can be realized more quickly and efficiently with the new LED boards from Lumileds.

“The energy crisis is top of mind for all and every advance is important. LUXEON XR 5050 HE delivers the efficacy in a robust format with proven LUXEON 5050 HE LEDs in a format that speeds time to market,” said Benjamin Khoo, Product Manager. “With immediate availability of standard optics and drivers, this is perhaps the most efficient and appropriate solution for high output energy saving fixtures.”

LUXEON XR-HL2X
For typical light output levels ranging from 1400 to 2800 lumens, in 3000 and 4000K, 70CRI, with board level color control ≤ 5 SDCM, the LUXEON XR-HL2X is an excellent selection. The standard 8-up, 12-up, and 16-up boards use the Zhaga footprint and are compatible with off-the-shelf drivers, optics, and heat sinks. For many low bay and outdoor area lighting solutions, LUXEON XR-HL2X is exactly what is needed and eliminates the need to design and test boards and configurations.

Both of the new standard solutions use factory selected LEDs for color and performance consistency mounted on an MCPCB substrate that provides thermal efficiency and mechanical robustness. Both have UL8750, ENEC, CE, and UKCA approbations.

Complete product information and datasheets for LUXEON XR-5050 HE and LUXEON XR-HL2X LED can be found at https://lumileds.com.

About Lumileds
Lumileds is a global leader in OEM and aftermarket automotive lighting and accessories, camera flash for mobile devices, MicroLED, and light sources for general illumination, horticulture, and human-centric lighting. Our approximately 7,000 employees operate in over 30 countries and partner with our customers to deliver never before possible solutions for lighting, safety, and well-being. To learn more about our company and solution portfolios, please visit https://lumileds.com.

Did you like this article?

Share this article

You could also like this

Regulations

DALI Part 151 certification reaches products, targets surge protection for outdoor lighting

DALI Part 151 has moved from specification into certified products, giving manufacturers a defined framework for surge protection of DALI control devices exposed to induced electrical transients in outdoor lighting.

Regulations

UK now allows approved LED replacement bulbs in MOT tests

From 14 October 2026, MOT testers must accept ECE approved LED replacement (LEDr) bulbs fitted in compatible halogen headlamp units on class 3, 4, 5 and 7 vehicles. The change does not apply to class 1 and 2 motorcycles, halogen units converted for HID bulbs, or full LED headlamp unit replacements. Approved LEDr products must carry a permanent, secure approval sticker on the vehicle visible during the MOT. Testers need only check the presence and condition of this sticker and must fail the headlamp where the sticker is missing, unreadable, appears tampered with, or does not match the fitted bulb.

Regulations

IEC 60598-2-24:2026 published — updated requirements for limited-surface-temperature luminaires

The new edition of IEC 60598-2-24:2026 has been officially published. It specifies essential safety requirements for luminaires intended for use where combustible dust or flammable materials are present, necessitating strict control of enclosure surface temperatures to prevent fire or ignition. The revision aligns test methods and construction requirements with recent developments in industrial and specialist lighting and with the latest edition of the general standard CEI EN 60598-1:2024. Publication of the EN and subsequent CEI standard will follow as formal steps, after unanimous positive votes. ASSIL members can contact the Technical Area for clarification.

Regulations

The EU Energy Performance of Buildings Directive (EPBD) Is Coming

Europe aims to become climate-neutral by 2050 under the European Green Deal. A key pillar of this initiative is the revised European Energy Performance of Buildings Directive (EPBD), which all 27 EU Member States are required to implement beginning in 2026.

Luminuscree ledEdison optoTE connectivityLTF TechnologyLoreos

The latest Press Releases

Explore All

Stay current with our monthly Update from the lighting industry

LEDprofessional Newsletter

You will receive a confirmation e-mail. Unsubscribe anytime.