McLED

Regulations

AtomSvet Received the ISO 9001 Certification

The quality management system (QMS) works very well at LLC AtomSvet. The German certification centre TÜV SÜD verified its conformity with ISO 9001. TÜV SÜD performed a scheduled supervisory audit of the quality management system (QMS) of AtomSvet on 16 April 2014.This audit is one of the two…

LED professional Editors

LED professional

The following was checked in the course of the audit:
1. production of luminaires, including the quality acceptance of the finished products;
2. provision of production with high-quality raw materials, materials, and component items;
3. construction of the luminaires;
4. performance of the internal QMS audits;
5. analysis of the efficiency of the QMS on behalf of the management.

The representative of TÜV SÜD remarked on the high level of professional training in QMS of managers and specialists of the relevant branches of AtomSvet.
According to the results of the audit by the certification centre, it was decided that AtomSvet’s QMS meets the requirements of standard ISO 9001 and, consequently, the validity of the issued certificate has been verified.

About AtomSvet:
AtomSvet is a manufacturer and developer of LED lighting fixtures and automated lighting control systems. AtomSvet Company is the exclusive Russian producer of LED luminaires whose products comply with the requirements of CE (Conformité Européenne) and GS (Geprüfte Sicherheit) (certifying agency — “TÜV SÜD”).

Did you like this article?

Share this article

You could also like this

Regulations

DALI Part 151 certification reaches products, targets surge protection for outdoor lighting

DALI Part 151 has moved from specification into certified products, giving manufacturers a defined framework for surge protection of DALI control devices exposed to induced electrical transients in outdoor lighting.

Regulations

UK now allows approved LED replacement bulbs in MOT tests

From 14 October 2026, MOT testers must accept ECE approved LED replacement (LEDr) bulbs fitted in compatible halogen headlamp units on class 3, 4, 5 and 7 vehicles. The change does not apply to class 1 and 2 motorcycles, halogen units converted for HID bulbs, or full LED headlamp unit replacements. Approved LEDr products must carry a permanent, secure approval sticker on the vehicle visible during the MOT. Testers need only check the presence and condition of this sticker and must fail the headlamp where the sticker is missing, unreadable, appears tampered with, or does not match the fitted bulb.

Regulations

IEC 60598-2-24:2026 published — updated requirements for limited-surface-temperature luminaires

The new edition of IEC 60598-2-24:2026 has been officially published. It specifies essential safety requirements for luminaires intended for use where combustible dust or flammable materials are present, necessitating strict control of enclosure surface temperatures to prevent fire or ignition. The revision aligns test methods and construction requirements with recent developments in industrial and specialist lighting and with the latest edition of the general standard CEI EN 60598-1:2024. Publication of the EN and subsequent CEI standard will follow as formal steps, after unanimous positive votes. ASSIL members can contact the Technical Area for clarification.

Regulations

The EU Energy Performance of Buildings Directive (EPBD) Is Coming

Europe aims to become climate-neutral by 2050 under the European Green Deal. A key pillar of this initiative is the revised European Energy Performance of Buildings Directive (EPBD), which all 27 EU Member States are required to implement beginning in 2026.

Luminuscree ledEdison optoTE connectivityLTF TechnologyLoreos

The latest Press Releases

Explore All

Stay current with our monthly Update from the lighting industry

LEDprofessional Newsletter

You will receive a confirmation e-mail. Unsubscribe anytime.