Trends

Trends

Resources | LpR Article | Technologies | Optics | Nano-Optics | Oct 08, 2018
LED Lighting Requires New Approaches in Optics
LED Lighting Requires New Approaches in Optics LpR 67 Article, page 88: Even though LED technology has been established LEDs still need new approaches in electronics, thermal management or optics to make complete use of their advantages. Marek Škereň, Chief Technology Officer of IQ Structures, explains how new optical devices, with the trade name Nanoptiqs, based on principles of diffraction are applied to achieve improved performance of white light illumination systems. This unique solution is based on full control over the modulation of material and geometric properties of the optical elements at a nano-level. A combination of complex transmission diffractive elements, with specially designed systems of micro-reflectors (produced using an innovative mass-production technique) is also presented as a promising flexible building unit for the construction of new generation luminaires. Read more »
Resources | LpR Article | Research | Thermal Management | Testing | Oct 08, 2018
Automatic Panel Level Transient Thermal Tester
Automatic Panel Level Transient Thermal Tester LpR 67 Article, page 44:The thermal resistance junction in case is an important parameter for the reliability of LEDs because degradation of the LED is temperature driven. Simulation and testing has advanced over the past few years but transient thermal analysis (TTA), which is required to understand the thermal transfer path, is especially work and time consuming - and not automated. Gordon Elger, Professor for Electronic Manufacturing Technologies, Technische Hochschule Ingolstadt, and his co-authors, Maximilian Schmidt, Alexander Hans, and Dominik Müller, present and discuss an automatic panel level TTA tester. They explain the challenges and the solution and demonstrate the applicability of using LED test board-panels. Read more »
Technologies | Light Generation | OLEDs | Special Applications | Displays | Aug 07, 2018
Electron Beam Patterning for Full-Color HR OLED Displays
Electron Beam Patterning for Full-Color HR OLED Displays OLED microdisplays are increasingly establishing themselves in consumer-ready wearables and data glasses. In order to meet the requirements for higher efficiency, higher contrast, and higher resolutions in these applications, Fraunhofer FEP scientists have developed a new micropatterning approach for OLEDs on silicon substrates. This might eliminate the use of color filters and shadow masks in the future and allow full-color displays to be developed by means of a new process. An increase in efficiency and considerably broader color gamut have already been demonstrated in first experiments. Read more »
Technologies | Research | LEDs | Quantum Dots | Light Conversion | Jul 19, 2018
Liquid-Suspended White QD LEDs Achieve Luminous Efficacy Record
Liquid-Suspended White QD LEDs Achieve Luminous Efficacy Record Quantum dot (QD) white LEDs that show a luminous efficacy of 105 lm/W have been developed. The QDs are liquid-based and, according to researchers, could help the LEDs achieve an efficacy double that of LEDs that incorporate quantum dots in solid films. With further development, researchers say the new LEDs could reach an efficacy over 200 lm/W. Read more »
Technologies | Research Reports | LEDs | Manufacturing | Jul 12, 2018
InteGreat Project Successfully Researched New Approaches to LED Production
InteGreat Project Successfully Researched New Approaches to LED Production In the InteGreat research project, Osram Opto Semiconductors coordinated a consortium comprising seven partners from science and industry. Between December 2014 and February 2018 the project partners investigated time-honored manufacturing approaches and know-how along the entire LED production process with the aim of identifying potential areas for optimization. The new insights allow for LED products to be given additional superior properties that would have been difficult or even impossible to achieve with the technologies previously used to produce LEDs. Read more »
Technologies | Research News | Thermal Management | Jul 09, 2018
Intended for High-Performance Computer Chips - Maybe Also Useful for LEDs
Intended for High-Performance Computer Chips - Maybe Also Useful for LEDs The inner workings of high-power electronic devices must remain cool to operate reliably. High internal temperatures can make programs run slower, freeze or shut down. Researchers at the University of Illinois at Urbana-Champaign and The University of Texas, Dallas have collaborated to optimize the crystal-growing process of boron arsenide – a material that has excellent thermal properties and can effectively dissipate the heat generated in electronic devices. Read more »
Resources | LpR Article | Research | Life-Time | Simulation Tools | Jul 05, 2018
Lifetime- and Economic Efficiency Simulation of LED Luminaires in Dymola/Modelica
Lifetime- and Economic Efficiency Simulation of LED Luminaires in Dymola/Modelica Article from LpR 66 | page 40: The lifetime of an LED system is usually specified by the LM-80 report using the TM-21 method. Unfortunately, this value is solely valid for one specific application. Sebastian Hämmerle and Thomas Schmitt from the University of Applied Sciences in Vorarlberg developed a new open-source Modelica library for dynamic simulation of LEDs: The DynaLed library. The aim of the work was to evaluate the lifetime and the corresponding economic efficiency of LEDs in dynamic operation by means of the LM-80 report and according to the TM-21 calculation method. Furthermore, it should be possible to use the library for component dimensioning, e.g. the heatsink. The primary task was to develop simulation models which can be parametrized with manufacturer information, e.g. the datasheet, but still provide sufficient accuracy. As an application example an LED louvre luminaire (Article Code: 29001077) from LEDON Lamp GmbH was simulated utilizing the developed library. At the end, results from the lifetime- and the economic efficiency simulation were discussed. Read more »
Resources | LpR Article | Research | Light Generation | LEDs | Nanowire | Jun 27, 2018
Full-Color InGaN/AlGaN Nanowire Light-Emitting Diodes for SSL and Displays
Full-Color InGaN/AlGaN Nanowire Light-Emitting Diodes for SSL and Displays III-nitride based nanowire light-emitting diodes (LEDs) have received a staggering response as a future candidate for solid-state lighting and full-color displays due to their unique and exceptional features including drastically reduced polarization fields, dislocation densities as well as the associated quantum confined Stark effect (QCSE) on account of their effective strain relaxation. Moab Rajan Philip and his supervisor Dr. Hieu P Nguyen in the Nano-Optoelectronic Materials and Devices Laboratory at the New Jersey Institute of Technology (NJIT) present astonishing ideas to fabricate and control the color emission of III-nitride nanowire LEDs via molecular beam epitaxy (MBE) growth techniques. The advantage of such LEDs and their characteristics is also discussed. Read more »
Technologies | LEDs | Micro-LEDs | Light Generation | Special Applications | Displays | Jun 19, 2018
KAIST Team Develops Flexible Blue Vertical Micro LEDs
KAIST Team Develops Flexible Blue Vertical Micro LEDs In CES 2018, micro LED TV was spotlighted as a strong candidate for replacing the active-matrix organic light-emitting diode (AMOLED) display. Micro LED is a sub-100 um light source for red, green and blue light, which has advantages of outstanding optical output, ultra-low power consumption, fast response speed, and excellent flexibility. Professor Keon Jae Lee from the Department of Materials Science and Engineering and his team have developed a low cost production technology for thin-film blue flexible vertical micro LEDs (f-VLEDs). Read more »
Business | Research | Partnerships | Fundings | SciPiL | Apr 26, 2018
The Austrian Province of Burgenland Invests in Joanneum Research
The Austrian Province of Burgenland Invests in Joanneum Research At today’s press conference in Weiz, Austria, the provinces of Styria, Carinthia and Burgenland emphasised their prospective closer cooperation in the area of research. Burgenland holds an interest of five percent in Joanneum Research and will be active in the promising research area of “Smart Connected Lighting”. Thus, the research axis south of Carinthia through Styria into Burgenland is to be further reinforced, and international visibility of domestic research is to be increased. Read more »
Technologies | Light Generation | LEDs | Color LEDs | Mar 29, 2018
Scientists Reveal the Fundamental Limitation of In Concentration in InGaN Solid-State Devices
Scientists Reveal the Fundamental Limitation of In Concentration in InGaN Solid-State Devices For the first time an international research group has revealed the core mechanism that limits the indium (In) content in indium gallium nitride ((In, Ga)N) thin films - the key material for blue light emitting diodes (LED). Increasing the In content in InGaN quantum wells is the common approach to shift the emission of III-Nitride based LEDs towards the green and, in particular, red part of the optical spectrum, necessary for the modern RGB devices. The new findings answer the long-standing research question: why does this classical approach fail, when we try to obtain efficient InGaN-based green and red LEDs? Read more »
Business | Research News | Partnerships | Mar 14, 2018
Luger Research Creates an Active Network to Secure the Future of Innovation in Lighting: The First Meeting Will Take Place at the LpS 2017
Luger Research Creates an Active Network to Secure the Future of Innovation in Lighting: The First Meeting Will Take Place at the LpS 2017 Luger Research establishes the first scientific lighting partnership network for research experts and leaders in the lighting industry. The scientific partnership has been created to form an active network that will strengthen and build the connections between universities, research laboratories and industry. The scientific partnership’s mission is to enable and secure the continued development of innovation in lighting technology. Read more »
Resources | LpO Article | Statements | Technologies | Mar 05, 2018
Prof. Shuji Nakamura - The Future is Laser Lighting
Prof. Shuji Nakamura - The Future is Laser Lighting PROF. NAKAMURA SAID: "For violet LEDs we reach about 50-100 Acm-2 but the laser diode uses 3-10 kAcm-2 which is about 1,000 times higher than blue LEDs. This leads to very tiny chips in combination with the same phosphors such as YAG types. The light output is about 1,000 times higher than conventional LEDs with the same chip-size". Read more »
Technologies | Light Conversion | LEDs | Quantum Dots | Feb 26, 2018
Realizing Highly Efficient QD LEDs with Metallic Nanostructures at Low Cost
Realizing Highly Efficient QD LEDs with Metallic Nanostructures at Low Cost The Korea Advanced Institute of Science and Technology (KAIST) announced that a team of their researchers have discovered a technology that enhances the efficiency of Quantum Dot LEDs. Professor Yong-Hoon Cho from the Department of Physics and his team succeeded in improving the efficiency of Quantum Dot (QD) Light-Emitting Diodes (LEDs) by designing metallic nanostructure substrates. Read more »
Technologies | Light Generation | Phosphors | Feb 22, 2018
Supercomputers Aid Discovery of New, Inexpensive Material to Make LEDs with Excellent Color Quality
Supercomputers Aid Discovery of New, Inexpensive Material to Make LEDs with Excellent Color Quality A team led by engineers at the University of California San Diego has used data mining and computational tools to discover a new phosphor material for white LEDs that is inexpensive and easy to make. Researchers built prototype white LED light bulbs using the new phosphor. The prototypes exhibited better color quality than many commercial LEDs currently on the market. Read more »
Resources | IP Snapshot | Technologies | Feb 16, 2018
100 Years Lighting IP Applications
100 Years Lighting IP Applications These IP Snapshots show approximately 100 years of patent applications of the IPC class F21 lighting and the IPC class H05 electric techniques. Both IPC classes are the most relevant in the lighting domain. Annually, over 60,000 applications are filed globally and an increasing number of IP applications is predicted over the next few years. Lighting, in general, and the electronics are, therefore, quite similar in numbers. Read more »
Technologies | Smart Lighting + IoT | Feb 06, 2018
Fraunhofer IIS IoT-Bus: The Secure Communication Bus - Not Just for Lighting
Fraunhofer IIS IoT-Bus: The Secure Communication Bus - Not Just for Lighting The Fraunhofer Institute for Integrated Circuits IIS is developing the IoT-Bus with IPv6 support and integrated security concept. It is a communication bus based on EIA/RS-485 and the IEEE 802.15.4 standard, which enables a secure and reliable data transmission of measured values and control commands and connectivity to the Internet of Things. The IoT-Bus forms a cross-media communication protocol and unites the two worlds of WPAN and fieldbuses without complex protocol conversion. The novel technology IoT-Bus is developed as part of the SEEDs project. Read more »
Resources | LpR Article | Technologies | Applications | Jan 15, 2018
Multi-Pixel LED Technology Opens New Horizons for Smart Lighting Applications
Multi-Pixel LED Technology Opens New Horizons for Smart Lighting Applications The evolution of Multi-Pixel LED technology has initiated a giant leap in the development of intelligent lighting systems which are most visible in the automotive industry. Now the first hybrid LED provides smart headlights with more than 1000 individually controllable pixels. Ralph Bertram, who is working on advanced LED device concepts, and Norbert Harendt, who is developing optics solutions for general lighting at Osram Opto Semiconductors, show that automotive lighting is just one of the potential areas in which intelligent selective pixel control can be applied. Options for the use in general lighting, such as information display for outdoor, indoor, retail or industrial applications, are very versatile. Read more »
Resources | LpR Article | Research | Sustainability | Environment | Jan 15, 2018
Repro-Light - Looking for a Sustainable and Modular Luminaire Architecture
Repro-Light - Looking for a Sustainable and Modular Luminaire Architecture The Repro-light project aims to re-conceptualize the European lighting industry towards more sustainability and competitiveness in terms of production and time to market. This will be achieved through the implementation of modular luminaire architecture and a smart production scheme, demonstrated by the development of a reconfigurable customized LED luminaire designed to improve the customers’ health. Read more »
Resources | LpR Article | Research | Optics | Engineering | Jan 15, 2018
Optimization of Freeform Optics Using T-Splines in LED Illumination Design
Optimization of Freeform Optics Using T-Splines in LED Illumination Design Freeform optics is the game changer in the illumination industry in terms of its ability to redirect the light into the target area. Non-Uniform Rational B-splines, commonly known as NURBS are widely used to represent freeform curves and surfaces. There are certain optical systems where local modification of the surface is necessary during the design or optimization phase. In such cases, NURBS cannot offer such transformations. But a new mathematical representation called T-splines make this feasible. Though its potentiality is well described, this has not been implemented in any optimization routine so far. Annie Shalom Isaac, Jiayi Long and Cornelius Neumann from the Karlsruhe Institute of Technology demonstrate the advantage of the local refinement ability of T-splines by implementing it in the optimization routine and the results are evaluated. Results show that T-splines provide more uniform and homogenous light distribution as compared to NURBS at a faster convergence rate. This makes optical design or optimization using T-splines an intuitive approach for future freeform design tasks. Read more »
Resources | Tech-Talks Bregenz | Research | Light Generation | Jan 15, 2018
Tech-Talks BREGENZ - Julia Frohleiks, Researcher, University of Duisburg-Essen
Tech-Talks BREGENZ - Julia Frohleiks, Researcher, University of Duisburg-Essen In his commentary on technical progress and innovation, Dr. Sejkora said: “In the early stage, in the first phase of its life cycle, technology is mainly driven by fundamental research.” He went on to say that we can never predict how a technology will develop. Researchers from the University of Duisburg-Essen, working in the Nano Energy Technical Center (NETZ), worked on this type of fundamental technology and their submission received the LpS 2017 Scientific Award. Ms. Julia Frohleiks, a Ph.D. student, was a major contributor to this research in the group led by Dr. Ekaterina Nannen and accepted the award in Dr. Nannen’s name. In the following interview she gives some background information and discloses future research possibilities. Read more »
Resources | LpR Article | Commentary | Trends | Jan 15, 2018
Can You Show Me the Next S-Curve, Please?
Can You Show Me the Next S-Curve, Please? The evolution of technologies is often described using the “S-curve” model. In the early stage, in the first phase of its life cycle, technology is mainly driven by fundamental research. Only a few players are active at that time and innovation steps are quite large. In the second phase, early adopters start to develop products and bring them to market. This phase is characterized by huge investments. In the third phase, more and more players enter the technology field, competition becomes important and development speed of the technology decreases. In the last phase, the technology is mature, (nearly) everybody can use it, there are fewer margins and the technology should be replaced by a new one. Many of the SSL technologies have meanwhile reached maturity. Where are the upcoming technologies, what will be the next S-curve? Looking at technology discussions and lectures at LpS 2017 I tried to find answers to these questions. Read more »
Resources | LpO Article | Event-Reports | Technologies | Measurement | Jan 11, 2018
Measurement Seminar – from SSL to Displays
Measurement Seminar – from SSL to Displays For the third consecutive year, Instrument Systems invited engineers from all industries that deal with light measurement of SSL products and different kinds of displays to their seminar. LED professional’s Editor in Chief, Arno Grabher-Meyer, was also pleased to receive (and accept) an invitation. In this article he shows what attendees can expect, who might find this event of interest, who would benefit the most and who should definitely not miss the next opportunity to attend. Read more »
Technologies | LEDs | Light Generation | Dec 13, 2017
Atomistic Calculations Predict that Boron Incorporation Increases the Efficiency of LEDs
Atomistic Calculations Predict that Boron Incorporation Increases the Efficiency of LEDs High-power white LEDs face the same problem that Michigan Stadium faces on game day -- too many people in too small of a space. Of course, there are no people inside of an LED. But there are many electrons that need to avoid each other and minimize their collisions to keep the LED efficiency high. Using predictive atomistic calculations and high-performance supercomputers at the NERSC computing facility, researchers Logan Williams and Emmanouil Kioupakis at the University of Michigan found that incorporating the element boron into the widely used InGaN (indium-gallium nitride) material can keep electrons from becoming too crowded in LEDs, making the material more efficient at producing light. Read more »
Augmented Reality | Technologies | Nov 13, 2017
NEC Improves Workplace Efficiency with AR Solution Utilizing Smart Glasses
NEC Improves Workplace Efficiency with AR Solution Utilizing Smart Glasses Tokyo, November 7, 2017 - NEC Corporation (NEC; TSE: 6701) today announced the development of an Augmented Reality (AR) solution to assist users with the selection of items through the use of smart glasses, a smart watch and new "ARmKeypad" functions. This solution enables users to perform tasks without having to look away from objects, making it ideal for use in manufacturing, logistics and other industries. Currently, NEC is carrying out demonstration tests at a hospital pharmacy and a manufacturing floor, where it has confirmed a reduction in workplace errors and working time thanks to the assistance of the new solution. Read more »
page_peel