Products & Services

Downlights | Systems + Applications | Indoor Applications | Luminaires | Feb 27, 2019

WAC Lighting unveils Aether 2" Extreme Shallow LED Recessed DownLight

WAC Lighting unveils the Aether 2" Extreme Shallow Recessed Down Light, a "Next-Level down light" which features a low profile LED housing that is designed to fit in very tight plenum spaces without compromising lumen output or glare control. Aether provides general, accent and wall wash illumination in a wide range of indoor and covered outdoor space applications in residential, commercial, hospitality and architectural environments. Read more »

Featured | Luminaires | Mar 10, 2017

Willighting Develops New Special LED Aluminum Strip Light With Magnets

Willighting develops new special LED aluminum strip light with high performance. Using high bright CRI>80 SMD4014 to ensure high quality. The most special is that there are magnets at the back and magnet wire at one end different from other common items. It is very easy and convenience to install. 575x18x20 mm, 855x18x20 mm and 1205x18x20 mm could be available. Of course, other size could be customized by your requirement. Read more »

Systems + Applications | LiFi | Luminaires | Nov 15, 2017

World's First Industrialized LiFi Luminaire

As result of a co-development partnership with the Scottish company pureLiFi, Lucibel presents the world's first industrialized LiFi solution on the market. LiFi (Light Fidelity) is a communication technology through modulated LED light that enables data exchange between a specific LED lighting fixture and a computer, making Internet access possible. The performance of this bidirectional broadband connection has been multiplied by 4 since the installation of a Lucibel prototype in June 2015. The reception of data transmitted by the lighting fixture is done via a LiFi USB key whose size has been divided by 5 since the initial prototype installation. Read more »

Systems + Applications | Indoor Applications | Outdoor Applications | Luminaires | Aug 02, 2017

ZALEDA EVOL II - Premium Weatherproof Luminaire for Indoors and Outdoors

Highly robust and efficient, with quality of light for increased demands and flexible, versatile use. OEM Systems Group's new LED weatherproof luminaire ZALEDA EVOL II meets all specifications for a highly durable premium solution. Both indoors and outdoors. This is the very first indoor luminaire just as suitable for outdoor applications – even without roofing. Read more »

A New Dawn Arrives with the Worldwide Launch of Vista 3 by Chroma-Q

Chroma-Q®, who recently acquired and rebranded the Jands Vista lighting & media control system, has released the long anticipated Vista 3 software, which introduces a large number of exciting new features and improvements. Read more »

Work Lights | Systems + Applications | Special Applications | Bluetooth | Mar 13, 2019

Bosch Brings Rugged, Bright Bluetooth® Light to Jobsites

Controlling an area light shining over the entire jobsite can be tricky when it's strapped to the rafters. That's why Bosch is introducing the future of connected lighting. The Bosch GLI18V-1200C 18V Connected LED Area Light with Bluetooth® offers users full control over the smart light using a mobile device. Pros can now turn the light on and off remotely, dim the light to the desired brightness, put it on a timer and even check the battery – all from the free Bosch Toolbox App. Read more »

Lextar to Releases New Mini LED Product Series

Lextar Electronics Corp.will release a new series of Mini LED ready for mass production, including I-Mini Blue, the smart backlight module integrating mini LED and driver IC, which can realize high contrast and slim design and is already introduced to applications such as gaming laptop panel. At the same time, Lextar will also launch pitch 0.7mm UFP I-Mini RGB display as well as micro LED technology. Applications of the whole series will be presented in Touch Taiwan 2019 held in Nankang Exhibition Center during 28 to 30, August 2019. Read more »

Special Applications | Systems + Applications | Wearables | Textiles | Mar 07, 2019

Luminous Motorbike Clothing for Enhanced Safety on the Road

Motorbike clothing manufacturer Held is cooperating with Osram to improve visibility on the road by including a range of models in its current collection that can be retrofitted with LED light modules from Osram. This move allows greater visibility and enhanced safety for motorcyclists during the night hours and in foggy and similar conditions. Read more »

Medical | Systems + Applications | Special Applications | Nov 14, 2019

Philips Announces First Installation of IntelliSpace Critical Care and Anesthesia System

Philips interoperable digital technology, predictive trend analytics and smart algorithms help drive improved outcomes in acute care. Read more »

A Manufacturing Revolution for the LED Lighting Industry

LpR 67 Article, page 76: Western business investments in local manufacturing facilities have been declining since the 1980s due to partnering with contract manufacturers in Asia. But with increasing and hidden costs in Asia, companies are now seeking to bring manufacturing back home. A recent innovation, microfactories, could be the solution. Paavo Käkelä, Chairman and VP at EID Tech in Finland, presents the microfactory called Ant PlantTM. He explains this new, flexible manufacturing concept, shows how it works and how it is set up, and analyzes the benefits of local, automated production of LED lighting products as an alternative to contract manufacturing in Asia. Read more »

A Study on Aerosol Jet Printing in LED Module Manufacturing

LpR 68 Article, page 38: LED module manufacturing technologies have certainly improved over the last few years but the requirements have also increased. More components are packed on today’s modules causing additional thermal stress, and, at the same time, the demand for lower cost challenges module manufacturers. So the (re-) search for new materials and new manufacturing processes and manufacturing technologies is still on. Paul Hartmann, Director of the Institute of Surface Technologies and Photonics at the Joanneum Research Forschungsgesellschaft m.b.H., and his team, Andreas Rudorfer, Martin Tscherner, Christian Palfinger, Frank Reil, Franz P. Wenzl with Ioannis E. Seferis, Eugeniusz Zych from the Faculty of Chemistry of the University of Wroclaw investigated the opportunities of aerosol jet printing and proved the applicability for alternative ways of phosphor deposition and integration and to replace wire bonding of dies. Read more »

Paradigm Changes in Lighting Are Challenging Lighting Companies

Fabien Bubendorff has a Master in Electronic Engineering and has 10 years' experience in the lighting industry. He has spent more than 13 years living in China. He worked as a Product Manager for a Retail Lighting Company, for the Last 5 years he was responsible for Wever&Ducré as the Head of R&D in China and for the last years Head of R&D at XAL in Austria. Now he has founded an independent consultancy to support European Lighting Companies to deal with these future challenges. He specialized in finding the optimal balance between function and cost to increase product profitability. Read more »

Roll-to-Roll UV Nanoimprint Lithography for Large-Area Nano- and Micro-Structuring of Flexible Substrates

LpR 67 Article, page 50: Cost and time-efficient methods for the fabrication of optical elements are highly desirable in the field of lighting. Imprinting optical structures in combination with large area fabrication turns out to become an effective approach in this regard. In particular roll-to-roll UV nanoimprint lithography (R2R-UV-NIL) has a large potential to set new benchmarks for the fabrication of miniaturized, low-cost and low-weight optics that can be applied in many fields of applications. In the following, the Joanneum Research Forschungsgesellschaft m.b.H team, Claude Leiner, Stephan Ruttloff, Dieter Nees, Anja Haase, Ladislav Kuna, Wolfgang Nemitz, Franz-Peter Wenzl, Christian Sommer, Barbara Stadlober and Ursula Palfinger, led by Paul Hartmann, demonstrates the maturity of the related process chain, combining optical design, direct laser lithography, step&repeat imprinting for shim fabrication and R2R reproduction. Read more »

Smart LED System in Package through Wafer Level Integration Approach

It is believed that LEDs will dominate all lighting applications in the near future. Integration and packaging are the two critical issues that, if resolved, will enable efficient and reliable solutions for lighting requirements. Z. Kolahdouz, H. van Zeijl, and G. Q. Zhang from the Institute of Microsystems and Nanoelectronics (DIMES) at the Delft University of Technology, and M. Kolahdouz from the Thin Film Laboratory and Nano-Electronics at the Department of Electrical and Computer Engineering of the University of Tehran show that wafer level packaging is a promising method to ensure lower cost, higher scale, and superior yield. A new integration approach of a smart unit of LED lighting is introduced: LED System in Package (SiP). Read more »

Swiss Photonics Workshop on Intelligent Efficient Solid State Lighting

Swiss Photonics held their Swiss Solid State Lighting Workshop in the Pantheon at Muttenz near Basel on December 12th of last year. The ambience of the automobile museum was perfect! The program covered a broad range of topics including Human Centric Lighting, Internet of Things and the results of the LASSIE project (Large Area Solid State Lighting Intelligent Efficient: A 7th Framework Program for Research and Technological Development). In the following article, Arno Grabher-Meyer, Editor-in-Chief at LED professional, summarizes the highlights. Read more »

Tech-Talks BREGENZ - Philipp Henrici, President and Managing Director at BJB

It’s unusual for a lighting company to be older than electric lighting itself, but BJB in Arnsberg, Germany is celebrating their 150th anniversary this year. LED professional’s Siegfried Luger and Dr. Günther Sejkora spoke with Philipp Henrici, the President and Managing Director at BJB about disruptive technology changes, starting from petroleum lamps to electric lighting as well as conventional lighting versus solid state lighting. They also touched on the subjects of chances and drawbacks of LED component standardization, modular systems and automated production processes. Read more »

Variability in LED Production and the Impact on Performance

LEDs are subject to manufacturing deviations, which have an impact on the end product. Benoit Bataillou and T. Merelle, guest authors from Pi Lighting, review the surprisingly large impact on LED performance and light quality. They used traditional as well as modern indicators like CRI and TM-30 as well as the latest circadian indices to measure. The results are explained by spectral modeling and a variability study. They show the large impact on CRI, even with small deviations inside the same bin. Read more »

Kenneth Martin from Zumtobel about Comfortable Lighting

Kenneth Martin has been specifying, qualifying an developing components and characterization setups for LED light sources within the Zumtobel Group since 2006. With his expertise on spectral measurements and applications, he supports integrative lighting solutions topics. He gathered valuable knowledge in physics and optical system engineering while studying at the University of Applied Sciences RV-Weingarten, during the internships at a quality assurance department of a reflector aluminum manufacturer and the optical development department of Zumtobel. He combines his enthusiasm for lighting and sustainable construction engineering with a DIY philosophy. Read more »

Resources | Projects | Tools | Software | Feb 08, 2017

Delphi4LED Project: New Design Tools To Speed Up Time To Market of HQ Large-Area LED Products

VTT Technical Research Centre of Finland develops novel LED light sources based on large, flexible and transparent substrates in collaboration with the Finnish companies Flexbright and Lighting Design Collective. An easy-to-customise LED foil suitable for mass production enables the introduction of the large area lighting and display technologies to applications such as vehicles, greenhouses, shopping centres and architectural lighting. Read more »

Resources | Fundings | EU-Calls | Manufacturing

EU-Call: New Product Functionalities Through Advanced Surface Manufacturing Processes for Mass Production

This call addresses research projects on surface modifying technologies (e.g. generation of micro- and nanostructured surfaces) that are suitable for mass production. Proposals for research on surfaces with special optical properties could be applicable but also structuring techniques on chip base. Read more »

Resources | Fundings | EU-Calls | Manufacturing | Measurement

EU-Call: In-Line Measurement and Control for Micro-/Nano-Enabled High-Volume Manufacturing for Enhanced Reliability

This call addresses proposals regarding R&D activities on test and measurement of micro- and nanostructured surfaces during mass production. This could cover e.g.in-line measurement technics of optical surfaces. Read more »

OpenAIS Project Completed after Successful Validation of IPv6 Based Lighting Controls

The EU-Horizon 2020 co-funded OpenAIS [1] project, that successfully brought open IPv6-based control to the lighting world, has been completed as planned. A consortium of seven leading companies in lighting, IoT and building management and two knowledge institutes worked closely together for 3.5 years on IP-to-the-end-node connected lighting for professional buildings. Read more »

New Patent Aims to Improve Light Distribution of Tubular Lamps and Luminaires

Appropriate even light distribution in LED replacement tubes respectively tubular LED lamps and luminaires is still one of the weak points of LED lighting. Recently the interesting patent application "Light distribution using tapered waveguides in LED-based tubular lamps as replacements of linear fluorescent lamps" covering that topic became a granted patent, with patent number US8,348,467 B2. Read more »

Components | Electronics | Driver IC | Feb 26, 2018

Power Integrations' New LYTSwitch-6 LED Drivers - High Efficiency and Very Low Standby Power

Power Integrations (Nasdaq: POWI), the leader in high-efficiency, high-reliability LED-driver ICs, today announced the LYTSwitch™-6 family of safety-isolated LED-driver ICs for smart lighting applications. The new ICs deliver flicker-free output up to 65 W, and feature up to 94% efficiency and as little as 15 mW standby power, with configuration options for two-stage or single-stage PFC support. Read more »

Components | Electronics | Driver IC | Mar 30, 2018

Ricoh Launches a LED Driver IC with PFC and low EMI Emission for Mains Powered LED Lighting Applications

Ricoh Electronic Devices Co., Ltd. in Japan has launched the versatile R1700 LED driver controller. Designed to use in LED lighting applications and including features such as power factor correction, the controller boasts low EMI emission by zero voltage switching and various safety protection circuits. Read more »

Samsung Introduces Award-Winning Smart Sensor Module for Smart Lighting

Samsung Electronics Co., Ltd. has just completed development of a highly innovative, “Smart Sensor” Module (SSM) for use in the widest range of smart lighting applications. The new module was recently selected for the highest honor from the LIGHTFAIR International 2017 Innovation Awards in the category of “Controls: Components, Sensors, Interfaces and Software”. LIGHTFAIR is the largest lighting conference in North America. Read more »

Components | Electronics | Driver Modules | Nov 20, 2017

Seoul Semiconductor Introduces an Acrich Based Compact LED Driver with 5X the Power Density of Conventional Drivers

Seoul Semiconductor, a global leader and innovator of LED products and technology, has developed an ultra-compact LED driver series with a power density 5X higher than conventional LED drivers. Based on Seoul Semiconductor’s patented Acrich technology, the MicroDriver Series delivers more than 24W of output power with a power density of 20W/cubic inch cubic inch, compared to existing drivers at 3-5W/cubic inch. Measuring just 1.5” x 1.1” x 0.8” (38mm x 28mm x 20.5mm), the MicroDriver is 80% smaller than conventional LED drivers, giving lighting designers the ability to develop ultra-thin and novel luminaires with flicker-free operation. Read more »

Components | Electronics | Driver IC | May 12, 2017

Seoul Semiconductor Introduces World’s Smallest 24W DC LED Drivers

Seoul Semiconductor, a leading global innovator of LED products and technology, has developed the industry’s smallest phase-cut DC LED driver series, with a power density 10x higher than conventional LED drivers. The NanoDriver Series is the world’s smallest miniature converter at just 13.5 mm wide, and is available in four versions rated for 16 W and 24 W output power for operating LED lighting with input power of 120 V or 230 V (50-60 Hz). Manufactured with Seoul Semiconductor’s original Acrich technology, the NanoDriver Series features an IC directly attached to the substrate, dramatically reducing the size of the converter. Read more »

Silvair Ready with the World’s First Qualified Bluetooth Mesh Stack

Yesterday, the Bluetooth Special Interest Group (SIG) adopted the highly anticipated Bluetooth mesh networking specification, opening a new chapter in the evolution of connected lighting technologies. Silvair, a pioneer in Bluetooth-based smart lighting networks and one of the major contributors to the development of this new global standard, is the world’s first company offering software solutions for lighting that are officially qualified by the Bluetooth SIG. Read more »

Swatch Group - World's Smallest Bluetooth Chip with Useful Features for Lighting

Three world records in the "Swiss Silicon Valley". Swatch Group is proud to introduce a new Bluetooth chip with exceptional features unrivaled by any existing product. The new integrated circuit is designed 100% by EM Microelectronic, Swatch Group R&D and the Swiss Center for Electronics and Microtechnology (CSEM). Read more »