LEDtronics DC to DC Dimmer for LED Lighting Products, Supports 5VDC to 40VDC, Up to 2Amps
LEDtronics® announces the release of its new DC to DC Dimmer for LED Lighting Products, Supports 5Volt DC to 40Volt DC, up to 2Amps or 24Watts, part number LED-DIMMER-001. The LED Dimmer makes it possible to dim all 5Volt DC to 40Volt DC LED products such as LED strip lights, LED bulbs and LED floodlights.
Since LEDs draw much less current then traditional incandescent bulbs one had to buy a special high-end electronic dimmer to control the desired light levels for their LED lighting application. The DC to DC LED Dimmer is ideal to use on all your 12Volt DC LED products, mix and match LED light strips and LED bulbs, max load per DC to DC Dimmer is 24Watts. The LED Dimmer will enhance your architectural low power high-benefit lighting designs. An extra advantage in using a LED dimmer: by lowering the current to the LED you extend the life of the LED.
LED Dimming Range is 0-100% of Input. Input Voltage can be any DC Voltage between 5Volt DC and 40Volt DC. Dimmer output Voltage is continuously adjustable between zero and full-on. LED Dimmer operates on minimal no-load current (10-15mA). Power dissipation of the LED dimmers drive circuitry is less than 0.7Watts. No extra load added to the lighting circuit, current draw is only 10-15mA. Not for use with inductive devices such as motors etc…
No special configuration needed. LED Dimmer can drive up to 2000 Standard White discrete LED’s or 50 High-Flux LEDS. One unit can dim the supplied power for an entire lighting channel or up to 2Amps, 24Watts Max of LED bulbs, floodlight, tube lights and light strips. LED Dimmer can be used with 12Volt DC solar power systems or connect directly to 120Volts AC to 12Volt DC transformers. Size is 2.3inch (58mm) long by 1.9inch (48mm) wide by 1.1inch (28mm) high (excluding knob). Comes in an industry-standard hockey puck package design. Design for panel or rack installation, or stand-alone use.
About LEDtronics Inc.:
